Search results

Seems like the interwebs always says not to mess with cams and/or porting heads unless looking for 600-700+ to the wheels. The exception being swapping to the 98 intakes for the extra 15-20 HP gain; which is usually only recommended when already going into the motor... This setup doesn't seem...

Well, I believe he said they were 214 dur .470 lift on the intake, but stock exhaust. He seemed quite confident in the combo... When you say high boost, what number would you associate with high boost? Would you consider aver 10 high boost, or over 15 high boost? Thanks!

So the one I got off Amazon came in and we believe it might work out OK. It is the PRW 1828111 Xtreme Duty SFI-Rated 164 Teeth Steel Flexplate for Ford 4.6L DOHC 1992-06 http://www.amazon.com/gp/product/B004L2UM2Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 The 8 bolt crank seems to line...

Already had the cooling mod, I made sure he knows to swap it to the new heads. I would love some electric cutouts rigged to open at WOT! Not much on the eye candy, but it cleans up nice. Got the blue cam covers with clear powdered Powered by Ford coil covers. The IC tubing is powdered a...

Hey, RacerX, do you recall which flexplate you posted a pic of showing a difference in depth in relation to the stocker? Do you know if that difference caused an issue? Thanks!

If that one don't fit right with misaligned bolt holes and such, there may be another option from B&M. First I called B&M and they couldn't tell the specs of the unit and that it was discontinued. There are, however, quite a few online sources that claim they have it in stock. Then I called...

Thanks for the inputs! So what is it about the KB BAP that might be an issue? It was already installed in the car with some decent gauge wire to battery and a relay... As for maching the IW balancer, you can send it back to the manufacturer for that same service. The shop here says he can do...

Ok, I found what I hope is the right one on amazon. The PAX units are made by PRW from what I found around the boards. So PRW 1828111 should equal PAX28111 I ordered this one: http://www.amazon.com/gp/product/B004L2UM2Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 I'll report back if it fits...

No sir, I have not driven a car with 3000-3500 stall, I really wish I had as to have made a more informed decision. You may have seen my other thread where I have an unplanned engine rebuild and such going on, as well as a tranny rebuild. I wasn't about to rebuild the tranny and put the old...

Are you saying you don't think the rebuilt unit would be of good quality, or are you saying there would not be enough performance gain?

Have you used this unit? That looks a lot like the one some folks had trouble with.,

I need an 8 bolt flexplate for our stock converter. I have searched quite a bit on the flexplates, but I am still not sure what I need. I have seen some threads where some flexplates had a different depth, others where the bolts holes didn't correctly line up on the crank, and others that...

Thought I'd share what went on when I tried to order a converter from PTC in Florence Alabama. I believe PTC is the converter MO's usually recommends, and the shop working on my car also highly recommended PTC. I have personally used PTC for a few converters over the years, and with my...

Hello all, welcome to my looong build description! I am doing a round of mods to my Marauder in conjunction with an engine build and was looking for a critique of my plans here. Current plans: All forged rotating assembly Teksid block .020 over 9.5:1 CR Paxton Novi 1200 with intercooler...

I'm thinking of robbing the meth kit of my old tbird and calling it a day

It will be 93, hoping for 475ish. I know this guy's dyno is known to hurt feelings. It's a mustang with eddy break

They estimated 800 for the custom IC.

Trying to decide if the intercooler upgrade is necessary. At 10-12 lbs I didn't really seem to have real bad IATs. The shop is thinking 15-17 lbs with cams and an 18% OD. I'm hoping for 15 because I'm not sure I'm comfortable with more than that. Actually we've discussed If it ends up too...

Also the shop was recommending a bell intercooler core

Already getting some cams cams for sure. I just feel like my IATs were pretty good already good...