Search results

  1. G

    IAC Valve Problem Possibly Solved??

    IAC has no effect on shifting or TC lock/unlock
  2. G

    New Expendable's 2 Trailer

    amen brother!! http://www.youtube.com/watch?v=9nz9-NWdsis
  3. G

    Alignment Flags

    does your car drift right? it should by those specs
  4. G

    Lingenfelter Camaro ZL1 Tops 200 MPH

    The Special Vehicle Team at Ford designs the gt500. Carroll shelby just puts his name on it
  5. G

    My turn with the plasti dip

    because you can just peel it off if you wanna go back to stock
  6. G

    Recommended injectors ?

    I've got 39# injectors for the vortech setup Im installing. Previous owner was in the same HP range
  7. G

    For Sale 2003 mm BLACK

    man, if you were closer to me and in the same country i would be up for a trade. those torinos are sick!!
  8. G

    Anyone here try the New Corsa Exhaust

    never heard "loose and putty" used to describe an exhaust sound before.lol
  9. G

    pinion bearing shim

    .070" is way to thick. .035" is what i have in my 4.10 right now. if you don't have the proper tools than start with .035" and work from there
  10. G

    Rattling at start-up

    i'm going with exhaust leak at the manifold or spark plug blow out
  11. G

    Alignment guys (Fox body Mustang)?

    negative caster will cause drifting or instability. toe does not effect pulling/drifts
  12. G

    Alignment guys (Fox body Mustang)?

    get that left side camber down to -0.3 or -0.4 and you will no longer have a drift right.
  13. G

    Alignment guys (Fox body Mustang)?

    according to those specs, that car will drift right due to road crown. there isn't enough lead to counter it
  14. G

    Alignment guys (Fox body Mustang)?

    it sounds like they were trying to correct a tire pull originally when they aligned the car with the 20 year old tires. now that you have good tires that don't pull, its now pulling due to the way they set it up previously. the new alignment should have corrected it. it would help alot if...
  15. G

    Differential removal?

    not necessarily. lots of extra work to pull the entire axle assembly out and once its out it will be a PITA to set pinion bearing preload without the axle assembly secured down.
  16. G

    vortech install instructions?

    are there any vortech installation instructions specific to the marauder floating around somewhere? any tips/advice from those who have installed one themselves? thanks guys
  17. G

    Trick to remove upper ball joint nut??

    do this ^^ exactly. i do this on a daily basis. the nylon "lock tight" nut gets all bound up in the threads. heat it up and melt the nylon and it'll come out no problem
  18. G

    Canadian Marauder registry

    232,000km here
  19. G

    DayTime Running Light Delete?

    if you have a drl module then just unplug it...taadaa thats what i did
  20. G

    Anti-seize for spark plugs...

    the cyl head in that picture is right side which is cyl 1-4
Back
Top