What did you do to your car today?

[Pops]

Found out the T Bolt Short Block is done!

 

[Mr. Man]

Took the SB out for some fresh gas and filled the tyres. Only the front DS needed any amount of air. It was down to 29lbs. Not to bad for sitting since Nov. Car started right up w/ a bit of rattle which I attributed to lack of oil in the upper part of the engine. It quited down in a couple of seconds and ran like a champ.

 

[breeze]

laid a nice patch down after shifting 2nd. :burnout:

 

[MOTOWN]

i ordered a set of r1 concepts "premium series" drilled/slotted rotors for the rear since i beat the hell out of the oem getting them off for repairs.

 

[Ms. Denmark]

Took Ms. D's SB out for some fresh gas and filled the tyres. Only the front DS needed any amount of air. It was down to 29lbs. Not to bad for sitting since Nov. Car started right up w/ a bit of rattle which I attributed to lack of oil in the upper part of the engine. It quited down in a couple of seconds and ran like a champ.

And you ordered a new drivers seat insert......thanks Babe!! :lovies:

 

[Dj1]

I put in my tinted reverse lights.


Sent from my iPhone4 using Tapatalk

 

[tbone]

Oil change, wash and passed emissions again.:banana2:

 

[LANDY]

i loaded a new trans tune, the car feels like never before. thanks Dennis.
got the new COP installed. thanks Travis.

 

[stinger 7]

Did 0-60 in about 4 and a half seconds today.

 

[MOTOWN]

i got my wheels back from weldcraft!....all i can say is dayyumm! 18x10 is a lovely thing!! i used a 15mm (.59") hub centric spacer, and its dead on perfect i have about 1/2" of clearance between the inside tire wall ,and the shock , and about an inch from the metcos, it looks awsome and still tucked in!

the work on the wheels is priceless! ,and worth every penny!,ill post pics later, i havent had any sleep since midnight shift

 

[ctrlraven]

Tried to do some datalogging, what a damn headache that is since there is no manual or real instructions online.

 

[LANDY]

i got my wheels back from weldcraft!....all i can say is dayyumm! 18x10 is a lovely thing!! i used a 15mm (.59") hub centric spacer, and its dead on perfect i have about 1/2" of clearance between the inside tire wall ,and the shock , and about an inch from the metcos, it looks awsome and still tucked in!

the work on the wheels is priceless! ,and worth every penny!,ill post pics later, i havent had any sleep since midnight shift

can't wait to see the pics later.

 

[LANDY]

Tried to do some datalogging, what a damn headache that is since there is no manual or real instructions online.

it take s a little patient if there is no manual but a couple of times and its all good.

 

[Mr. Man]

Thought I'd start Mr. Black today. No juice at all. Didn't even get idiot lites. I thought the battery was jukey last year but my mechanic talked me out of a new one as the existing one still had 24 months on its rating. I'll see if I can get a little pro-rating on a new one. Cruise nites start up here in April so I guess I have about a month to get my act together.

 

[dakslim]

Had a new windshield installed as the old one was severly pitted. I can see when I'm driving into the sun again.

 

[fastblackmerc]

Had a new windshield installed as the old one was severly pitted. I can see when I'm driving into the sun again.

Getting her polished up for this Sunday?

 

[ctrlraven]

it take s a little patient if there is no manual but a couple of times and its all good.

Would even better if I know what things I need to check off to be read to figure out my TC issue.

 

[MOTOWN]

i got my rotors/pads on, and mounted my widened wheels:banana2:, still waiting on addcos so ill leave it on the stands for the next couple days till they arrive

its a bit dirty/salty

 

[MOTOWN]

heres a few more pics, shows how close 1/2" the inside tire wall is to the shock

 

[dakslim]

Getting her polished up for this Sunday?

Something better.