BBK LT install

musclemerc

musclemerc

Senior Member
I have recieved alot of PM's, texts, and phone calls about the BBK LT header install I recently did for MMBLUE. I want to start by saying he got the headers basically for FREE, they came as a package with the engine he purchased.

The BBK's bolt right up and basically require the same mods as a shorty install. Shim the DS motor mount, grind the steering shaft, etc. With the exception that you have to bend the tube going to cylinder #5 on the underside @ the steering shaft. These are true LT's and stop behind the transmission bellhousing (not a mid length like the Kooks) and the starter is WIDE OPEN. These header's can easily be found on the cheap at just about every modular site on the net.

Here are the pics:

IMG_0122.jpg



IMG_0123.jpg
 
^^I forgot about that one.
The same as a shorty install, it require's an egr adaptor.

I make the adaptor if anyone needs one
 
Thanks for posting this Travis. I know you are partial to the shorties, but I know you are more partial to doing it on a budget. And this is on the cheap. Last night for Shats and giggles, I was looking around the net for BBK's and tons out there for 200 to 350. I hope a lot of others get in on this. Sounds great and more ponies for less bucks. That's what I'm talking about.:) BTW, EGR totally functional with Travis's EGR kit he sells.
 
BBK LT for 03-04 Cobra/Mach 1 correct? Is there ones for manual or automatic? I know their old ones for pre-96 on the 5.0 pr motors listed manual or automatic.

Even the new ones are under $600.
 
Last edited:
BODYMAN said:
this is some good info and now another option good job Travis!
Click to expand...

Thanks!

ctrlraven said:
BBK LT for 03-04 Cobra/Mach 1 correct? Is there ones for manual or automatic? I know their old ones for pre-96 on the 5.0 pr motors listed manual or automatic.

Even the new ones are under $600.
Click to expand...

Yes, 03~04 Cobra-Mach1, The automatic trans is what you want.
I am also gonna look into the tube design on other LT's that are cheaper like MAC, Pacesetter, etc....

blackbeauty2 said:
That's good news Travis. I might think into that.
Click to expand...

If you saw the starter clearance you would be surprised, and the collectors line up EXACTLY with our stock H pipe, so if other's want to they can make their own MAUKAT system these will work.
If you need any help PM me Landy.

:burnout:
 
Last edited:
this just proves kooks "mm specific" headers dont fit worth a ****. if these bbk headers designed for a MUSTANG fit the same as kooks something is wrong. incase dennis is reading kooks are pos, there i said it again.

good job T. wish you were doign this stuff when i was building my car, coulda saved alota time and money
 
I ordered a set of new Pacesetter uncoated incase I had to do some primary tube mods.. I've been too busy working on my other car I haven't had a chance to start on those. I'm glad you got to the BBK's because thats another economical option for us guys.

:beer::beer::beer::beer::beer::beer::beer::beer:
 
I have read some posts about these BBK headers saying that they pit and rust like crazy, and sometimes leak.

Does anyone here have these and have used them for a few years now without any issues? They certainly are a good option price-wise however I'd like to see that they also last.
 
JoeBoomz said:
I have read some posts about these BBK headers saying that they pit and rust like crazy, and sometimes leak.

Does anyone here have these and have used them for a few years now without any issues? They certainly are a good option price-wise however I'd like to see that they also last.
Click to expand...

The stock manifold gaskets are multi layered SS so leaks are'nt an issue

Be aware these are NOT MM specific headers and will require modifications to make them work. You will not get an opinion from someone running them for a few years because there are only a few MMs running non MM specific LTs.

I know of 3~4 but there may be others :confused:
 
I have a suggestion for all vendors that Mod their own MM's. Why dont you all show up at a meet and run heads up? I only wish for good products for our cars. Thats the way we settle it in Chicago about who has the best car and product.
 
cpe6 said:
I have a suggestion for all vendors that Mod their own MM's. Why dont you all show up at a meet and run heads up? I only wish for good products for our cars. Thats the way we settle it in Chicago about who has the best car and product.
Click to expand...

What would that prove?
 
cpe6 said:
I have a suggestion for all vendors that Mod their own MM's. Why dont you all show up at a meet and run heads up? I only wish for good products for our cars. Thats the way we settle it in Chicago about who has the best car and product.
Click to expand...

I'm not sure what your getting at with this comment. I never mentioned any other vendors in this thread. This header install was done on the cheap with used parts, I know other vendors sell MM specific headers and would not waste their time modding non MM specific headers to fit.

If your gonna come into my forum and comment please try not to kick up any ***** while your here. I hate moderating comments and do not want to delete yours ;)
 
Last edited:
You must log in or register to reply here.
Back
Top