Runs ruff cold

Finally said:
So I gave it the once over and all is snug with the CAI,could this issue be that the 02's just need replacement.
I already have two new one to install, they are NTK 22500's.from what I can figure is they are the down stream.can anyone confirm this for me.

Thanks
Tony
Click to expand...

Do you have anything to watch the O2 voltage and fuel trims when you fire it up. I had similar issues with an O2 that was going bad. Wouldn't heat anymore and was very slow when it did work. Have also had issues with water getting in the O2 after installing the headers. Should be pretty evident if you have an O2 issue. I use the Torque app.
 
BigM460 said:
Do you have anything to watch the O2 voltage and fuel trims when you fire it up. I had similar issues with an O2 that was going bad. Wouldn't heat anymore and was very slow when it did work. Have also had issues with water getting in the O2 after installing the headers. Should be pretty evident if you have an O2 issue. I use the Torque app.
Click to expand...

I don't have a AF gauge but should,I'll check with Marty if he can set me up with one along with a trans temp gauge.
I ordered the upstream 02's from The local Ford and will pick them up also on Monday and look for any signs of leaks when I'm under the car,by torque app I'm assuming it's a sealant ?

Thanks
Tony
 
Finally said:
I don't have a AF gauge but should,I'll check with Marty if he can set me up with one along with a trans temp gauge.
I ordered the upstream 02's from The local Ford and will pick them up also on Monday and look for any signs of leaks when I'm under the car,by torque app I'm assuming it's a sealant ?

Thanks
Tony
Click to expand...

It's an app for your smart phone. Need an obd2 bluetooth dongle and the app, and you can monitor all the things your computer does, on your phone.
Like this one on ebay. You can also look up videos on YouTube on folks using the app.
http://m.ebay.com/itm/Mini-ELM327-V...TORQUE-ANDROID-US-BL-/291261648793?nav=SEARCH
 
Last edited:
Well the new battery is in,I fired her up and it didn't seem to show the symptoms upon first fire up that it was doing.now I
L take it for a good boot and see if any codes pop up.
Too all that have responded thanks for you suggestion and help.
 
You must log in or register to reply here.
Back
Top