What did you do to your car today?

Gryphonzus said:
Pulled rear drivers door panel off and peeled the plastic off in preparation of replacing window regulator and motor assembly. Ordered the front and rear sets of window regulators since I had to order the rear one. Overkill maybe? :flamer:And since I was ordering parts I ordered the driver window switch assembly and mirror adjust switch.
Click to expand...

Not overkill IMHO... I order all the regulator/motor assemblies when my passenger side went bad. It's just a matter of time until thee other go.

I can fix the switches for you.
 
Tint time

I got windows tinted all around. 30% with metal coating. Dramatically improved the riding comfort by holding back that Florida sunshine.
:banana:
 
Cleaned the engine bay a lil. Was going to wash the car but started raining
d8d244494d3fc12042909ebc2d1f7820.jpg



Sent from my iPhone using Tapatalk
 
LED's

Put all Green LEDs in the dash,shifter and gauges. All so put white Leds under the hood and both foot wells. Much better now.:)
 
Received all my parts and went out Saturday to fix the window. Got it all took apart and installed new regulator assembly. Re-installed window and bolted it in then plugged in motor and tried to roll down the window. It did not work. Plugged the rear switch in and it still did not work, all the other windows still work. Used my voltmeter and it says no voltage. Hooked my old motor up to the battery and it works, plugged it into the door and it did not work. Now at a loss as to the problem. Maybe a broken wire but it was working before I took the door apart. I guess I will have to run a wire from the battery back to the motor to make it roll up and down so I can put the door back together and just leave the window rolled up.:mad2:
 
Gryphonzus said:
Received all my parts and went out Saturday to fix the window. Got it all took apart and installed new regulator assembly. Re-installed window and bolted it in then plugged in motor and tried to roll down the window. It did not work. Plugged the rear switch in and it still did not work, all the other windows still work. Used my voltmeter and it says no voltage. Hooked my old motor up to the battery and it works, plugged it into the door and it did not work. Now at a loss as to the problem. Maybe a broken wire but it was working before I took the door apart. I guess I will have to run a wire from the battery back to the motor to make it roll up and down so I can put the door back together and just leave the window rolled up.:mad2:
Click to expand...

I would put money on it that it's your master switch.
 
You must log in or register to reply here.
Back
Top