De-Reinharting my DBP

[Zack]

http://www.foreinnovations.com/product_p/36-101.htm

simple and clean

You don't need that. $199??? For what?

Ground wire to hobbs switch, other wire from hobbs to the ground terminal on a bosch relay.
5 dollars, same thing.

 

[chief455]

You don't need that. $199??? For what?

Ground wire to hobbs switch, other wire from hobbs to the ground terminal on a bosch relay.
5 dollars, same thing.

Having run a Hobbs switch with 2 pumps myself, gotta agree with Zack on this.
I was simple and clean.

 

[blkZooM]

It's going to be a return system.

80lb. injectors
Fore fuel rails
Fore fuel regulator
5lb. hobbs switch
-8 supply line
-8 return line(might go -6 different companies suggest different things)
Fore pump controller
twin pumps, I haven't decided yet I have one Aeromitive stealth 340 with less that 1000 miles on it, so I might get another.

Sounds good, I'm guessing race gas is what you'll be running primarily, ever thought of running e85?

 

[Comin' in Hot]

Sounds good, I'm guessing race gas is what you'll be running primarily, ever thought of running e85?

I'm going to run 93 octane, I don't have E85 near me and don't want to be limited as to where I could drive it.

 

[Comin' in Hot]

I started doing some test fitting. I finally got the O-rings for the cobra heater return tube.

Here are some pics.

 

[MM03MOK]

What beautiful pictures!!! WOW!! Looks great!!! Good for you!

 

[blkZooM]

Looks right at home,


Sent from my iPhone using Tapatalk

 

[CWright]

That's looking great bubba!! Keep the Picts rolling!!

 

[burt ragio]

How sweet it is.

 

[MOTOWN]

Looks sweet!

 

[Blown3.8]

Lookin good Bro!

 

[justbob]

This

Reminds me of this.



Builder Of Badassery

 

[chief455]

justbob = :lol:


that looks like cow udders :up:

 

[Zack]

Isn't it fun lifting that thing on and off?

I did it countless times by myself....what a struggle.

 

[massacre]

^^^ Body By Whipple LMAO

 

[RoyLPita]

I have a water pump pulley somewhere with a lip on it. Would you be interested in it?

 

[Blown3.8]

Isn't it fun lifting that thing on and off?

I did it countless times by myself....what a struggle.

Only way to do it.

 

[Zack]

^^^^That is both intelligent and time consuming.
Aint nobody got time fo dat

 

[Comin' in Hot]

I used an engine hoist too, its just too clumsy when bolted to the lower intake.

 

[chief455]

OMG! Just do it.....