Door sills

Bluerauder said:
Guess what arrived by USPS today? Was waiting for me when I got home late from work. Too dark to install right now ... will wait until the weekend to do it right.

Just had to see what they looked like in position. Pardon my "helper's" hand in the pic .... she had to hold the lower one in place 'cause it wanted to slide off the sill. They look great. Thanks, Jim !!! :D

You can also see my Redline Floormats with blue lettering, too. :up: Floor is a little dirty since we haven't seen the sun since 13 September. That'll be fixed this weekend too. :o

BlueMMDoorSills.JPG
Click to expand...
They look nice Charlie:)
 
The Complete Set

Here's the set of Blue MM Door Sills. They go on tomorrow morning.
Update. Install completed this morning. They look terrific. Thanks Jim !!!!!! :D Just in time for MV9.

MMDoorSillsSet.JPG
 
Last edited:
how much are the brush finish door sills and the shifter bezal total to my door and how long will the order take to make?
 
mercuryed said:
how much are the brush finish door sills and the shifter bezal total to my door and how long will the order take to make?
Click to expand...

The sills are $235.00, shifter surround is $70.00, shipping is included.

Customizing is extra.
 
Last edited:
Bluerauder said:
Here's the set of Blue MM Door Sills. They go on tomorrow morning.
Update. Install completed this morning. They look terrific. Thanks Jim !!!!!! :D Just in time for MV9.

MMDoorSillsSet.JPG
Click to expand...

Had the driver's side sill plate pop off this morning. I caught my left foot on the sill with "MARAUDER" on it and it popped right off. Have only been on there for 3.5 months. I followed the directions to the letter. Removed and scrubbed the sills .... twice. Rinsed thoroughly. Wiped them down with alcohol .... twice. Let them dry overnight. Then used the 3M doubled sided taped and pressed them into place.

Any other hints or suggestions on this?

Lift your foot a little higher ain't an option. :rofl:
 
Bluerauder said:
Had the driver's side sill plate pop off this morning. I caught my left foot on the sill with "MARAUDER" on it and it popped right off. Have only been on there for 3.5 months. I followed the directions to the letter. Removed and scrubbed the sills .... twice. Rinsed thoroughly. Wiped them down with alcohol .... twice. Let them dry overnight. Then used the 3M doubled sided taped and pressed them into place.

Any other hints or suggestions on this?

Lift your foot a little higher ain't an option. :rofl:
Click to expand...

I've had mine on for at least 3 or 4 years. Have never had one come loose.
 
Bluerauder said:
Had the driver's side sill plate pop off this morning. I caught my left foot on the sill with "MARAUDER" on it and it popped right off. Have only been on there for 3.5 months. I followed the directions to the letter. Removed and scrubbed the sills .... twice. Rinsed thoroughly. Wiped them down with alcohol .... twice. Let them dry overnight. Then used the 3M doubled sided taped and pressed them into place.

Any other hints or suggestions on this?

Lift your foot a little higher ain't an option. :rofl:
Click to expand...

NATEHAWK said:
Try Epoxy. Works like a charm.
Click to expand...

Charlie these are known to commonly pop off!

Happened to me a few times!

Nate is right about the epoxy (5min.)

That's what we both use and have much better results! :beer:
 
DOOM said:
Charlie these are known to commonly pop off!

Happened to me a few times!

Nate is right about the epoxy (5min.)

That's what we both use and have much better results! :beer:
Click to expand...

Make sure the sill covers (plastic) are warm, like room temperature, when installing.
 
You must log in or register to reply here.
Back
Top