Fuel pump/tank removal

O

O3 pharoh

New member
Hey guys anyone have a link to a how to or thread for fuel pump replacement? Just curious if I need to drop the tank for the removal? If anyone has tips or tricks that would be great.

Sent from my DROID RAZR HD using Tapatalk 2
 
O3 pharoh said:
Hey guys anyone have a link to a how to or thread for fuel pump replacement? Just curious if I need to drop the tank for the removal? If anyone has tips or tricks that would be great.

Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...

Dropping the tank is probably the easiest, but you can swap out the pump with the tank in place, just little harder.
 
Jack up the car. Remove the right side exhaust tip from its hanger. Its helps give you more clearance when you pull the fuel hat out. I just unbolt the hanger.Then just unbolt the fuel hat. I think I might have even cut some of the wire harness tape too so that the fuel hat hung even lower. Put a rag in the fuel hat opening to keep the fumes to a minimum.

Well that's how I was told to did it and it was an easy task.


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom
 
What he said ^^^ pull the wiring out of the plastic piping for more wiggle room.

The pump replacement is straight forward and easy to figure out once down.


Self proclaimed Builder Of Badassery.
 
Make sure you siphon the fuel level down or you gonna have a mess! :eek:

Very simple job, & like ^^^ said no need to drop tank unless you wish to.

Have fun with the job! :D
 
^^^^^^^^^^^^Oh yeah. Duhhhhh. LOL^^^^^^^^^^^^^^^

I had a bout 1/4 tank of fuel.


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom
 
Ok, and if I drop tank for easier access, any hiccups there I will run into? Still remove the exhaust tip? Thanks guys

Sent from my DROID RAZR HD using Tapatalk 2
 
O3 pharoh said:
Ok, and if I drop tank for easier access, any hiccups there I will run into? Still remove the exhaust tip? Thanks guys

Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...

Fuk that noise man. A big waste of time and more work dropping the tank.


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom
 
O3 pharoh said:
Ok, and if I drop tank for easier access, any hiccups there I will run into? Still remove the exhaust tip? Thanks guys

Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...

If you do, have fun getting the bolts started again, or so I've read.


Self proclaimed Builder Of Badassery.
 
BODYMAN said:
+1 Them bolts are of mofo to get threaded initially.
Click to expand...

The dealer has replacement bolts for the tank straps. They are the style that will brake off and are then short like what you will see when looking at the bolt and nut. ask me how I know.
 
I didn't touch the exhaust, cut any wires, or completely unbolt either of the straps when I did mine. The wire harness connector on the top of the tank was a pain but worth it to avoid electrical issues in the future from clipping wires.
 
You must log in or register to reply here.
Back
Top