Gap With Upper Control Arm Replacement

[pantheroc]

I'mtalling Moog upper control arms, there's a 3/16 gap between strut housing and inner control arm bushings. Am I supposed to put the supplied washers in the gap?

 

[justbob]

I don’t recall any washers supplied. I do remember having to adjust the bushings in my press to line up correctly.


Sent from my iPhone using Tapatalk Pro

 

[Maverick pro]

Mine came with the washers and it said to use them in the installation. If not you will have the gaps.

 

[pantheroc]

I ended up using press to push the bushings in to match removed control arm.

 

[Comin' in Hot]

There should be spacers included. I’ve installed at least 4 sets.