New HID kit
- Thread starter ctrlraven
- Start date
ctrlraven
BiRDMAN
If you get a chance take a picture of the wires going into the blue plug so others who install and have those wire colors can use it as a quick reference.
russell072009
New member
just to update. after finally getting a hold of them on the phone they couldn't explain why my kit has not shipped yet and told me once again it should ship today. are you :censor: kidding me? The only reason i'm dealing with this is because most of you praise them and their kits over and over. i'll give them one last shot and then i'm done. this is one of the most unprofessional companies i have ever dealt with. :shake:
fastblackmerc
Everything Marauder, LEDs & HI
I had 0 problems with the kits I bought on eBay.
JBeezy
300B
Not taking up for them at all, but my experience with them has been ok. Other than the first kit being on back order and having to wait a extra week or two, I'm satisfied.
On the same note, I can see how they can sale out of these kits pretty quick as cheap as they are. Until now, I never knew. Last I remember they were over $200 for HID's.
On the same note, I can see how they can sale out of these kits pretty quick as cheap as they are. Until now, I never knew. Last I remember they were over $200 for HID's.
russell072009
New member
i understand selling out, but telling me it will ship that day then a week later telling me they don't know why it didnt ship is very bad business. as of this moment i still have not received a shipping confirmation from them. ill call them again and if it still didnt ship they will be getting a very nice go ***** yourselves.
russell072009
New member
called them today. they did not ship it yesterday either. my order has been canceled and i will never again deal with that company.
F
freddiewh
Guest
i order some and put them in they work fine thanks for that but i was having trouble with the foglights staying in i actually broke the bulb on one of them any body else have this problem or is it something special i have to do
ctrlraven
BiRDMAN
You need to modify the H1 bulb holder and then attach the HID bulb to the bulb holder collar.
Tape was only used to hold the two together while I applied the adhesive silicone.
snigalfriz
New member
Ctrlraven,
Did you have to make any modification to the fog light housing? I have a DDM kit, and I cannot slide the bulb into the housing and turn it to lock the ring into the housing. When I attempt it it looks like the bulb is too wide to twist in the factory opening.
Did you have to make any modification to the fog light housing? I have a DDM kit, and I cannot slide the bulb into the housing and turn it to lock the ring into the housing. When I attempt it it looks like the bulb is too wide to twist in the factory opening.
ctrlraven
BiRDMAN
ZERO mods to the housing, you have to join the ddm bulb to the H1 bulb holder collar. I used a drimel to remove the unwanted part and then trimmed the collar so the bulb sat in it correct and straight. I thought about using epoxy plastic welding kit but the silicone I used in the pictures above was stiff enough to allow me to put the bulb in and lock the ring into place without any problem. I allowed the rtv to set up for 24 hrs before touching it.
If I could get the H1 bulb holders alone I would just buy them in bulk and buy the ddm kit in bulk and sell them as a plug n play kit.
If I could get the H1 bulb holders alone I would just buy them in bulk and buy the ddm kit in bulk and sell them as a plug n play kit.
snigalfriz
New member
Hmmm. I will have to revisit it. I am creating a cast of the ring with a couple mods to make it a cleaner fit.
fastblackmerc
Everything Marauder, LEDs & HI
With my foglights I'm going to insert the bulb in the housing, lock it in with the modified OEM socket, then silicone the bulb to the socket.
snigalfriz
New member
I need to see why my bulb is "binding" when I try to lock it in.
