Shifter Mod
- Thread starter -Matt-
- Start date
ImpalaSlayer
...
pretty cool, doesn't beat my L-39 shifter
-Matt-
Ceiling Cat Is Watching You...
It beats everything of yours :cool4:
MrBluGruv
That GM guy....
man, I've been wanting to do this type of mod for so long, but I feel too scared to pull off the shifter bezel. How do you get that thing off?
And where did you get a shifter boot that fit that size? Is the center cap on the shifter handle the lockout button? So many questions I have.
And where did you get a shifter boot that fit that size? Is the center cap on the shifter handle the lockout button? So many questions I have.
Blackened300a
Sinister with style
Unless your hooking up working missiles to it, YOU FAIL!! :lol:
That looks really cool actually. Im not sure if I would install it in my car, but I do like the look.
guspech750
V.I.P Parking for DTR's only!!
That looks really awesome!! Good job!!
-Matt-
Ceiling Cat Is Watching You...
man, I've been wanting to do this type of mod for so long, but I feel too scared to pull off the shifter bezel. How do you get that thing off?
And where did you get a shifter boot that fit that size? Is the center cap on the shifter handle the lockout button? So many questions I have.
Shifter bezel pops straight off
Shifter boot, i used a 05 mustang boot
Yes its the lock out
ImpalaSlayer
...
all the buttons are functional fool! if it were legal i would have missles and get to work in like 10 mins, blasting fools out my way
musclemerc
Senior Member
So do you have to count the number of pulls to put it in drive? I noticed the gear selector indicator is gone.
RR|Suki
The Original Paxton
is this a serious question?? P - R - N - D It's not like you have to ever change directions or something
RR|Suki
The Original Paxton
pull the center console out and the whole thing will become very clear. Pulling the center takes all of 5 minutes
fastblackmerc
Everything Marauder, LEDs & HI
So i cant take full credit for this, I followed some of what RR/Suki did on his Marauder, but i added some twists of my own....
I think it came out nice
Looks good!
I have just the thing to dress it up:
Unpainted and not installed
Painted and installed
gdmjoe
Member
- move the shift lever to 1(st) *in preparation for the next step.
- grasp the guage pod by both sides and pull-up-and-out. *IIRC, the wires should(?) be long enough to set the unit to one side ... otherwise, disconnect the wires.
- move the shifter forward to (say) neutral.
- push-down on the plastic collar under the shifter handle. *It will slide-down, just takes a little effort.
- there are two allen-head set screws on the back of the shifter shaft that need to be removed to get the handle off.
- slowly lift-up on the handle and keep (say) your thumb on the selector button (so's not to jetison the button and spring.
) - disconnect the O/D wire which is tucked-up in the shifter.
- the upper console panel can now be removed by pulling-on on the panel. *IIRC, I started from the front.
- you'll need to disconnect light from the bottom of the assembly.
ImpalaSlayer
...
damn fbm, where did you get that made?
fastblackmerc
Everything Marauder, LEDs & HI
If I told you I'd have to kill you
Don't worry they should be available by Marauderville 8.