NEW!! Stainless Steel Coolant Crossover Plug

How many of each?

  • Total voters
    55
Mr. Man said:
Been on the fence about the bolt look vs. the recessed Allen key look. I'll try a polished one and see how I like it.

Will powder coat stick to stainless?
Click to expand...

Yes it will. As long as the parts can hold an electrical charge, you can powder coat it.

IMHO..... In this case I wouldn't recommend it since you'll have to remove it occasionally.

The whole reason to go with a "bolt" instead of the recessed "square" drive is the bolt is easier to remove. There have been many cases where you have to end up using a pair of channel lock pliers to remove the OEM plug, because the 1/4" drive ratchet or extension broke off or you just can't get enough torque to twist the plug, which results in a ratty looking plug.
 
fastblackmerc said:
The whole reason to go with a "bolt" instead of the recessed "square" drive is the bolt is easier to remove. There have been many cases where you have to end up using a pair of channel lock pliers to remove the OEM plug, because the 1/4" drive ratchet or extension broke off or you just can't get enough torque to twist the plug, which results in a ratty looking plug.
Click to expand...
I'm a member of this club and let me tell you: it SUCKS! Had to use heat to get the cap off, and in the process went too hot and put a nice crack in the weld which created a coolant leak that was uncurable. Had to buy a whole new crossover pipe.
 
a_d_a_m said:
I'm a member of this club and let me tell you: it SUCKS! Had to use heat to get the cap off, and in the process went too hot and put a nice crack in the weld which created a coolant leak that was uncurable. Had to buy a whole new crossover pipe.
Click to expand...
Are you saying the new plug is junky or that the old OEM style gave you trouble? Your post is unclear...........at least to me :)
 
I posted in the original thread and hit the poll, but just to cover all the bases I'll post here too.
I'd like one (01) ea., polished.
Thanks :)
 
Did everyone post what they wanted in the poll?

Will be contacting the guy that makes them with a quantity. Will use the quantities list in the poll.
 
Just as an FYI I was one of the first to install one of these plugs years ago. The piece is of great quality and totally worth the money. toybreaker(Lee) is a great guy and does great work.
 
OK we are doing this!

My PayPal is: fastblackmerc1 at att.net

Please send it as a gift so PayPal won't get their cut.......

Pricing:
Raw stainless: $41.50 shipped
Polished: $46.75 shipped

Please include the quantity, finish (raw or polished) and a shipping address with your order. If you wish to pay with cash, check or money order it needs to be sent to me.

Jim Marton
104 Park James Way
Cary, North Carolina 27518-6822

They will ship about 2 weeks after you order.
 
Last edited:
You must log in or register to reply here.
Back
Top