CAR Motorsports Gods Head Emblem Shipment Update

Mine came Monday with nobody to sign for them. Had to go pick them up Tues am @ the post office. Thanks Rich & Alan, they look great. I am a little tentative to put them on the car because they look ssooooooo good. All of the installs that I have read seen on this thread look great guys. Good job. I am going to wait for the weather to get a little warmer and then procede. What I would like to get is a GPS for piece of mind. Good luck to all the installs yet to come..............
 
Rich/Alan,

I havent seen anyone ask this yet so I will, is there any special things we should do or use to protect or clean the emblems especially with the grille one?
 
same thaught

djv5150 said:
I agree just look at the emblem embossed in our seat backs.
Same here David.....I lined up my stering wheel and my front grill to match the seats but the trunk lid emblem is bent in a way where you could only place it one way, with the neck to the side. I also check my encyclopedia and the pic of the god head is just like our seats.
No problem anyways....they are fantastic looking and car motorsports did an EXCELLENT job on these emblems. they are better than factory.
David, I'll need some help installing the trunk lid emblem. PM me when I can come by. I want to get it as close as possible to match the seats.
 
I just got off the phone with Rich and what a great experience I had. I left him a phone message last night and he promptly called me back this morning! This is one of the A+ vendors we have here on this site and I know I will be supporting them again in the future. Guys we sure are lucky to have these vendors.... especially for a car that they didnt make alot of. Rich thank you again for everything and your help will not be forgotten.

Just for anyone who is still interested in the emblems, Rich indicated he still has a couple sets left for sale. These are not cheapy plastic asia junk that every Dick and Jane sell but real honest to goodness metal ones that have been tripled chromed plated! I can't wait to see them on my car!:banana:
 
1 Bad Merc said:
I just got off the phone with Rich and what a great experience I had. I left him a phone message last night and he promptly called me back this morning! This is one of the A+ vendors we have here on this site and I know I will be supporting them again in the future. Guys we sure are lucky to have these vendors.... especially for a car that they didnt make alot of. Rich thank you again for everything and your help will not be forgotten.

Just for anyone who is still interested in the emblems, Rich indicated he still has a couple sets left for sale. These are not cheapy plastic asia junk that every Dick and Jane sell but real honest to goodness metal ones that have been tripled chromed plated! I can't wait to see them on my car!:banana:
I agree 100%
I've been on the phone with him twice and he been great.
Look at my CMS Gods Head emblem on my grill. I'm in love again.

<TABLE class=tborder cellSpacing=1 cellPadding=6 width="100%" align=center border=0><TBODY><TR><TD class=tcat width="100%"></TD><TD class=vbmenu_control id=rateimage style="CURSOR: hand" state="false" unselectable="true">Rate Image <SCRIPT type=text/javascript> vbmenu_register("rateimage"); </SCRIPT>
menu_open.gif
</TD><TD class=vbmenu_control id=imagetools style="CURSOR: hand" state="false" unselectable="true">Image Tools<SCRIPT type=text/javascript> vbmenu_register("imagetools"); </SCRIPT>
menu_open.gif
</TD></TR></TBODY></TABLE>
<FORM action=moderate.php method=post><TABLE cellSpacing=1 cellPadding=4 border=0><TBODY><TR><TD class=thead>Image Tools</TD></TR><TR><TD class=vbmenu_option>Edit Image</TD></TR><TR><TD class=vbmenu_option>Printable Version</TD></TR><TR><TD class=vbmenu_option>Add to Favorites </TD></TR><TR><TD class=vbmenu_option>Reply to Image</TD></TR><TR><TD class=vbmenu_option>Send as e-Card</TD></TR><TR><TD class=vbmenu_option>Email Image</TD></TR><TR><TD class=vbmenu_option>Receive Email Updates </TD></TR><TR><TD class=vbmenu_option>Report to Moderator</TD></TR></TBODY></TABLE></FORM>
<FORM action=newreply.php method=post><INPUT type=hidden name=s> <INPUT type=hidden value=rate name=do> <INPUT type=hidden value=2137 name=imageid> <TABLE cellSpacing=1 cellPadding=4><TBODY><TR><TD class=thead>Rate Image</TD></TR><TR><TD class=vbmenu_option title=nohilite><TABLE cellSpacing=0 cellPadding=0><TBODY><TR><TD><LABEL for=vote5><INPUT id=vote5 type=radio value=5 name=vote>Excellent</LABEL></TD><TD>
rating_5.gif
</TD></TR><TR><TD><LABEL for=vote4><INPUT id=vote4 type=radio value=4 name=vote>Good</LABEL></TD><TD>
rating_4.gif
</TD></TR><TR><TD><LABEL for=vote3><INPUT id=vote3 type=radio value=3 name=vote>Average</LABEL></TD><TD>
rating_3.gif
</TD></TR><TR><TD><LABEL for=vote2><INPUT id=vote2 type=radio value=2 name=vote>Bad</LABEL></TD><TD>
rating_2.gif
</TD></TR><TR><TD><LABEL for=vote1><INPUT id=vote1 type=radio value=1 name=vote>Terrible</LABEL></TD><TD>
rating_1.gif
</TD></TR></TBODY></TABLE></TD></TR><TR><TD class=vbmenu_option title=nohilite align=middle><INPUT class=button type=submit value="Vote Now"> </TD></TR></TBODY></TABLE></FORM>
<TABLE class=tborder cellSpacing=1 cellPadding=6 width="100%" align=center border=0><TBODY><TR><TD class=alt1 vAlign=top align=middle colSpan=4>
godshead020.jpg
</TD></TR></TBODY></TABLE>
 
Here is another shot of Car Motorsports God Head emblem.
FANTASTIC!

<TABLE class=tborder cellSpacing=1 cellPadding=6 width="100%" align=center border=0><TBODY><TR><TD class=tcat width="100%"></TD><TD class=vbmenu_control id=rateimage style="CURSOR: hand" state="false" unselectable="true">Rate Image <SCRIPT type=text/javascript> vbmenu_register("rateimage"); </SCRIPT>
menu_open.gif
</TD><TD class=vbmenu_control id=imagetools style="CURSOR: hand" state="false" unselectable="true">Image Tools<SCRIPT type=text/javascript> vbmenu_register("imagetools"); </SCRIPT>
menu_open.gif
</TD></TR></TBODY></TABLE>
<FORM action=moderate.php method=post><TABLE cellSpacing=1 cellPadding=4 border=0><TBODY><TR><TD class=thead>Image Tools</TD></TR><TR><TD class=vbmenu_option>Edit Image</TD></TR><TR><TD class=vbmenu_option>Printable Version</TD></TR><TR><TD class=vbmenu_option>Add to Favorites </TD></TR><TR><TD class=vbmenu_option>Reply to Image</TD></TR><TR><TD class=vbmenu_option>Send as e-Card</TD></TR><TR><TD class=vbmenu_option>Email Image</TD></TR><TR><TD class=vbmenu_option>Receive Email Updates </TD></TR><TR><TD class=vbmenu_option>Report to Moderator</TD></TR></TBODY></TABLE></FORM>
<FORM action=newreply.php method=post><INPUT type=hidden name=s> <INPUT type=hidden value=rate name=do> <INPUT type=hidden value=2138 name=imageid> <TABLE cellSpacing=1 cellPadding=4><TBODY><TR><TD class=thead>Rate Image</TD></TR><TR><TD class=vbmenu_option title=nohilite><TABLE cellSpacing=0 cellPadding=0><TBODY><TR><TD><LABEL for=vote5><INPUT id=vote5 type=radio value=5 name=vote>Excellent</LABEL></TD><TD>
rating_5.gif
</TD></TR><TR><TD><LABEL for=vote4><INPUT id=vote4 type=radio value=4 name=vote>Good</LABEL></TD><TD>
rating_4.gif
</TD></TR><TR><TD><LABEL for=vote3><INPUT id=vote3 type=radio value=3 name=vote>Average</LABEL></TD><TD>
rating_3.gif
</TD></TR><TR><TD><LABEL for=vote2><INPUT id=vote2 type=radio value=2 name=vote>Bad</LABEL></TD><TD>
rating_2.gif
</TD></TR><TR><TD><LABEL for=vote1><INPUT id=vote1 type=radio value=1 name=vote>Terrible</LABEL></TD><TD>
rating_1.gif
</TD></TR></TBODY></TABLE></TD></TR><TR><TD class=vbmenu_option title=nohilite align=middle><INPUT class=button type=submit value="Vote Now"> </TD></TR></TBODY></TABLE></FORM>
<TABLE class=tborder cellSpacing=1 cellPadding=6 width="100%" align=center border=0><TBODY><TR><TD class=alt1 vAlign=top align=middle colSpan=4>
godshead021.jpg
</TD></TR></TBODY></TABLE>
 
Has anyone got an answer to the bend of the rear badge question? I am looking to put mine on to match the seats, without the neck at an angle. Is there a fix to this?

I have suspended installation, as I don't like the neck angled....

Any suggestions???
 
I have suspended installation, as I don't like the neck angled....

Any suggestions???[/QUOTE]

I have to agree, I don't like the angle of the neck.
 
Position of Rear Badge...

Dragcity said:
Has anyone got an answer to the bend of the rear badge question? I am looking to put mine on to match the seats, without the neck at an angle. Is there a fix to this?

I have suspended installation, as I don't like the neck angled....

Any suggestions???

Black 04 said:
I have to agree, I don't like the angle of the neck.
"Me Three"...:confused:
 
Monday - Monday

I suppose we have to make some phone calls on Monday AM to CMS. I hope they can be re-bent somehow.

The bobbed trunk looks better that with the OEM emblem, but not as good as with the custom.
 
I finally got to put all my emblems today, including the S55 emblems. All I can say is WOW, these things look awesome. Thanks to everyone at CAR Motorsports for making this happen. Now all I need is painted tail lights and I'll be all set! :beer:

BTW, as far as all this neck-angle stuff goes, I placed my emblems to match DragCity's avatar. This looks best to me, and most like the old style, IMHO.

Thanks again guys, I couldn't be happier!
 
We need you help in contacting the members below.

Andre Iazzi
Marc Rocco


These two members each ordered a set of Gods Head Emblems and have not responded to our attempts to contact them concerning credit card declines. Presently, we are holding two sets of emblems for them. Shipping labels have been created and email notification of shipment has been sent. We have done our part, now we ask that they contact CAR Motorsports to revise their plan of payment.

Thank you,

Rich
CAR Motorsports
 
Dragcity said:
I suppose we have to make some phone calls on Monday AM to CMS. I hope they can be re-bent somehow.

The bobbed trunk looks better that with the OEM emblem, but not as good as with the custom.
I installed mine in the "angled forward" position as per the contour of the emblem. I'm not 100% happy but it may grow on me in time. I would be interested in any solution to this!
 
Krytin said:
I installed mine in the "angled forward" position as per the contour of the emblem. I'm not 100% happy but it may grow on me in time. I would be interested in any solution to this!

I am going to try to twist it just a bit from the contour of the bend and make up a little. They cannot be re-bent. I'll get another look at it tonight. When I first matched it up, it looked a bit exaggerated, but I'll look again. Maybe I'm a little off (that I know is true). Either way, I really, really like the tooks of our emblems. They did a great job.

Another benefit from these is if someone is coming at you with their highbeams on, they'll get the reflection from Old Merc right back at them...
 
Marauder2005 said:
Angled? My rear and front gods heads are angeled straight and not 'tilted'

No problems here :confused:

Plaese post pics of your rear.... no, not YOUR rear, the rear emblem. I would like to see what you did.

Thanks
 
Here's some quick shots of mine's, and no that's not a chip in the emblem. I don't know why/what it reflected. I have my grille on at an upwards angle.Also any one have pics of where they put their sail panel/fender emblems? I need some ideas.

000_0663.jpg


000_0669.jpg


000_0666.jpg
 
Last edited:
Marauder2005 said:
Angled? My rear and front gods heads are angeled straight and not 'tilted'

No problems here :confused:

Dragcity said:
Plaese post pics of your rear.... no, not YOUR rear, the rear emblem. I would like to see what you did.

Thanks
I've asked about this before, I'm wondering if some of the rear emblems were bent in different places then others, with my bend I can not place the emblem with the neck straight up and down. Pictures please, Marauder2005, Thanks.
 
Back
Top