What did you do to your car today?

Only 2 or 3 weeks after my new stereo system I had to replace the subwoofer. Although I used all new components but one. That one used component just happen to be the JL Audio 12 " subwoofer that had been in two other vehicles, and I had sitting out in the garage for the last few years. Turns out the surround was dry rotted. The new sub sounds amazing. This is what I was going for. I had to clock it a bit so I wouldn't be going in the same holes, but am just happy that it fit in the old enclosure.

a9e6076e91bbedb9b7d9976176497b8f.jpg


ae6947bb9d10e6e7e0f23906bea249e1.jpg



Sent from my SM-N910V using Tapatalk
 
Last edited:
Shop- all four ball joints and upper control arms replaced. Me- Ford spark plugs, took out center console and cleaned crap off all the edges, replaced rivet holding front right lock actuator bracket with bolt and lock washers, the rivet was half disintegrated and vibrated out of the door, also had a rattle in the left door, it was a knife I lost four years ago, the factory sub used to cut out and stay buzzing if I went over a bump the right way in fewer than 60 degree weather, I literally just took the radio out, unplugged it and reinstalled...fixed (weird).
 
I had to put my trailer hitch into the receiver today so I can pull my nephew out of a ditch he got stuck in my mowing after a rain.

Sent from my SM-N910V using Tapatalk
 
Floored it in an underpass. Jezus the Magnaflows sound freakin' great! I need to have someone drive it while I stand on a corner so I can hear it bark while not in the drivers seat.

I took off the Stainless Works muffs and put on baffled MF's. Too loud. Then I went with the MF Satin Series insulated straight throughs and it is magical.
 
tbone said:
Floored it in an underpass. Jezus the Magnaflows sound freakin' great! I need to have someone drive it while I stand on a corner so I can hear it bark while not in the drivers seat.

I took off the Stainless Works muffs and put on baffled MF's. Too loud. Then I went with the MF Satin Series insulated straight throughs and it is magical.
Click to expand...


YouTube video?
 
Finally got to put on my Sparta control arms :) in the short ride home the rear definitely felt more planted :banana2:

76FCF3D7-4367-4F8A-9A77-AC8FB2C875B3_zpswn3qka8w.jpg
 
More Mo's Mods

After Louisville Mo's shop installed the:
Watts link
Line lock
Fuel pump
TCE braded brake lines
Wire up zex/Trans gauge
Ajust the shocks to fit widen rims/tires (Thanks Jerry) :bows:

The MM handles great & very tight & plants it on take off.
A big thanks to Marty & Jeff & Mo's new crew. :bows:

Next to test it at the track late May for best times. :burnout:
 
WPG_Merc said:
After Louisville Mo's shop installed the:
Watts link
Line lock
Fuel pump
TCE braded brake lines
Wire up zex/Trans gauge
Ajust the shocks to fit widen rims/tires (Thanks Jerry) :bows:

The MM handles great & very tight & plants it on take off.
A big thanks to Marty & Jeff & Mo's new crew. :bows:

Next to test it at the track late May for best times. :burnout:
Click to expand...

Have you made it to Louisiana or Dallas yet?
 
So, let me get this straight, you are from Manitoba, Louisville is in Kentucky, Mo's shop is in Georgia and you drove all that distance to get that stuff done?

I don't know you and have never met you but I can already say you, sir, are awesome! :beer:
 
You must log in or register to reply here.
Back
Top