2014 Eaton Swap Thread Pics and Future Questions

[guspech750]

You're special. :bunny3:

My pedal is halfway to the floor.

Perhaps try installing your MM throttle body. I know the Cobra and ours are identical. But I though the plastic piece on the TB that the throttle cable attaches to is slightly different.

Just a thought.


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

 

[Zack]

You need to mod the bracket

 

[tbone]

You need to mod the bracket

Maybe. I have another idea.

 

[tbone]

What do those little plastic things inside the return spring do anyway?

Bueller????

 

[tbone]

What size fuse does the intercooler pump require? Wired it all up last night with the circuit breaker and ready to install. I was thinking 20 amp?

 

[Zack]

20 is fine

 

[tbone]

Special ordered the wrap at Advance. Thanks Justbob.

Pump wiring ready to go.

 

[tbone]

Nice new radiator installed.

Notice the double zip ties on the COT delete hoses. If one zip tie failed, it would be rubbed through from the belt in about 5 seconds.

I used the junction block method to terminate the battery cables and get power to the other side. I sprayed some undercoating on it to protect it from corrosion. Looks good black too.

Some pics are still downloading upside down......

 

[Zack]

Great work Tom

 

[tbone]

Is there a market for this or should I just throw it in the recycling bin?

 

[tbone]

A couple more progress pics.

Thanks Zack. I appreciate the tips you've given me, especially the flex EGR. It was easy with your research done.

 

[justbob]

You REALLY need to save up for a better camera..


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

 

[Zack]

Route your throttle/cruise cables behind the engine.
Looks way better that way

 

[8UWITH6]

Did you use 5/8" or 3/4" heater hose for the intercooler hoses? LMK thanks.

 

[Zack]

Did you use 5/8" or 3/4" heater hose for the intercooler hoses? LMK thanks.

3/4 from bottom outlet of reservoir to the pump.
3/4 from the pump to the Heat Exchanger.
5/8 from Heat exchanger to water outlet
5/8 from water outlet to 5/8-3/4 adapter, then back to reservoir

 

[JoeBoomz]

Stock intakes can sell, don't throw them out. Someone will want them.

If you want to just get rid of them, I'll pay for the shipping to me.

 

[martyo]

Stock intakes can sell, don't throw them out. Someone will want them.

If you want to just get rid of them, I'll pay for the shipping to me.

I will raise him $8

 

[tbone]

Route your throttle/cruise cables behind the engine.
Looks way better that way

I haven't finished tucking, nipping, taping and tidying everything up yet.

 

[tbone]

You REALLY need to save up for a better camera..


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

I didn't notice that one pic is blurry. But yeah, camera phones still have a way to go.....

 

[tbone]

Stock intakes can sell, don't throw them out. Someone will want them.

If you want to just get rid of them, I'll pay for the shipping to me.

Any idea on value?